The cart is empty.
My Cart{{shoppingcart.totalQuantity}} Item(s) Total: {{shoppingcart.subtotal}} {{shoppingcart.total}}

3 Roller Homebrew Mill Kit-HBF

SKU: MM-3 Kit-HBF
Weight: 19 lbs
Units in Stock: 25
MM-3 Kit - includes MM-3 Homebrew Grail Mill with 3/8" Drive Shaft, Base, and Galvanized Hopper.
List Price: $254.00
Price: $199.00
You Save: $55.00 (22%)
3 Roller Homebrew Mill Kit-HBF
3 Roller Homebrew Mill Kit-HBF
3 Roller Homebrew Mill Kit-HBF
3 Roller Homebrew Mill Kit-HBF
3 Roller Homebrew Mill Kit-HBF
3 Roller Homebrew Mill Kit-HBF
3 Roller Homebrew Mill Kit-HBF
3 Roller Homebrew Mill Kit-HBF
3 Roller Homebrew Mill Kit-HBF
3 Roller Homebrew Mill Kit-HBF
3 Roller Homebrew Mill Kit-HBF
3 Roller Homebrew Mill Kit-HBF
3 Roller Homebrew Mill Kit-HBF
3 Roller Homebrew Mill Kit-HBF
3 Roller Homebrew Mill Kit-HBF
3 Roller Homebrew Mill Kit-HBF
(Click to see larger image and other views)
Product Details

This Homebrew Finds special offer MM-3 Kit consists of the MM-3 mill with 3/8" drive shaft described below with the base and hopper for a low special price.  Kit does not include the oil and feeler gauge.


We DO NOT recommend this mill for ANY commercial application.  We recommend our HEAT TREATED steel rollers available on our Pro series mills for all COMMERCIAL applications.  Heat treated rollers last 10X as long as stainless, or our regular steel.  This mill will NOT mill corn.


Our 3-Roller Monster is meant to compete and win against the best milling products available. With all the great features of our already popular MM-2, and the addition of a third roller, you'll be able to achieve the best crush around, at a higher throughput speed. The MM-3 crushes all your grain twice, with one pass through the mill. It starts with a preliminary crush through the initial fixed gap between the top two rollers, and then ends with a pass through the second gap between the drive roller, and the bottom third roller. The initial pass slightly flattens the grain, and gets it ready for the next crush, that breaks apart the grains and loosens the starch with minimal husk damage.


The MM-3 consists of a 6061 aluminum block frame with three 6" long steel rollers riding on SAE 841 oil impregnated bronze bushings. We use a superior grade of steel that is much harder than what is found on most comparable products and should last almost twice as long. The drive shaft, and all the axles are integral to the roller rather than screwed into the ends. This makes it possible to reconfigure the mill making it possible to drive it counter-clockwise. All the axles are 3/8", with minimal freeplay in the bushings. With 20% more roller surface area than brand "C", you'll get more throughput with the same drive speed, in either direction!


One knurled steel roller is driven by a standard electric drill (not included) to feed the grain through the initial fixed gap of approximately .065", and then through the adjustable secondary gap and crush the grist. Both ends of the non-driven top idler roller ride in bronze bushings that are pressed into the frames, while the second idler roller rides in bushings that are offset mounted in an adjustable knob. The knob is held in a fixed position by a set-screw that you can loosen to adjust the mill. This system provides an adjustment range of .070". Our knobs are made from 303 stainless steel for excellent durability, and are larger in diameter than the competition, as well as knurled for a positive grip. We've also added a groove in our newest design knobs with a matching rounded head on the thumbscrew that allows for a much better grip on the knob to avoid gap changes while milling, and also providing knob retention.


The mill will be mounted above the base and attached using the included mounting bolts. You'll also need a high quality corded drill to drive this beast. We recommend a 1/2" drive corded Dewalt or other name brand comparable drill. This mill kit comes with the 3/8" drive shaft and will work with the most common 3/8" or larger drill.


This mill comes standard with 1144 alloy steel rollers, which offers fantastic wear for home brewers. Plain steel mills kept indoors, and used regularly won't have rust issues. Non climate controlled areas, or minimal usage could see some corrosion come up that is easily removed with a wire brush. We do NOT recommend this mill for any commercial operation, brew shop, brewery etc. 

6" Long Adjustable Gap:

  • fully adjustable mill
  • dual eccentric adjusters: 0 to .070" gap - built from STAINLESS STEEL for no galling
  • 8 lbs / minute
  • 6" upgraded steel rollers
  • drill-drive - CW, OR CCW
  • alloy frame
  • SAE 841 oil impregnated bronze bushings
  • 1.5" diameter steel rollers
  • 3/8" integral drive shaft w/3 flats for drill driving, 2" long outside frame
  • 3/8" integral axles
  • 1144 alloy steel rollers standard

Wooden base and steel hopper for your Monster Mill:
Product Reviews
Rate this product:  1   2   3   4   5 

May we also suggest...
 () indicates a required accessory.
Extension for Hopper
Price $44.00
Mineral Oil
Price $4.00
Feeler Gauge
Price $6.00
Bushings
Price $5.00

Monster Brewing Hardware
240 Compton Drive
Fayetteville, GA 30215
678-350-1731
info@MonsterBrewingHardware.com