My Cart
The cart is empty.
My Cart
{{shoppingcart.totalQuantity}} Item(s) {{shoppingcart.subtotal}} {{shoppingcart.total}}

MM-3ProG Kit - NEW!

SKU: MM-3ProG Kit
Weight: 66 lbs
Units in Stock: 30
Geared 3-roller grain mill, gear motor with wiring, hopper, bases, feeler gauge, and oil.
Price: $949.00
MM-3ProG Kit - NEW!
MM-3ProG Kit - NEW!
Product Details

This is the whole kit and caboodle!  An entire turn key system for your 5 bbl (or larger) brewery.  Kit consists of the MM-3ProG, Base/Hopper, Gear Motor, Coupler set, Wiring Kit, Gear Motor Base, feeler gauge, and food grade mineral oil.  720lb hour output with constant feeding will get you brewing for less than the competition.  See individual product descriptions for all the details.

Geared Grain Mill:

  • top two rollers both driven by 1215 alloy steel gears
  • grain driven third roller with fully adjustable gap
  • three six-inch steel rollers form two gaps, a preliminary fixed gap of approx .070", and a fully adjustable secondary gap
  • dual eccentric adjusters: 0.028 to .055" secondary gap - milled from solid 6061 billet aluminum
  • Igus™ bushings on both aluminum knobs to prevent galling
  • 3 x 6" long, 2" diameter 1144 alloy heat treated steel rollers
  • drill-drive – gear motor drive
  • 12 lbs/minute throughput at 240 rpms
  • 6061-T6 aluminum alloy frames
  • Oilite™ oil impregnated bronze bushings for the axles
  • 1/2" integral drive shaft standard w/3 flats for drill driving, 2" long outside frame
  • Optional 1/2” integral drive shaft with 1/8” keyway for direct drive with a coupler
  • 3/8" integral axles
Wooden base and steel hopper for your Monster Mill:
  • 9” Tall 11.5” x 12.75” at the top
  • 11 pound base grain capacity
  • 20 gauge G90 Hot dip galvanized steel construction
  • CNC Laser cut, and CNC bent
  • Ships unassembled
  • Assembles in minutes with included fasteners
1/2 HP Gear Motor:
  • 1/2 HP Capacitor Start / Capacitor Run single phase synchronous ACmotor
  • 1700 rpm motor with 7.5:1 gear reduction, and 240 rpm output
  • 110 or 220 V
  • Reversible
  • 22 mm output shaft with 6 mm keyway
  • Shaft height matches our new MM-3ProG geared mill with noadjustments needed
  • Made in China
Coupler:
  • TB Woods L075 series couplers halves
  • One half with 1/2” bore and keyway
  • One half with 22mm bore and 6mm keyway
  • Urethane jaw spider coupling insert

Gear Motor Wiring Kit

  • 18” aluminum conduit with proper steel retainer ends, onestraight, and one 90°
  • Super flexible 64 strand hookup wire with proper black, white andgreen XTFN insulation
  • Krimpa-Seal™ heat seal spade connectors on all wire ends
  • Metal switch box
  • Commercial grade single pole switch
  • Stainless steel faceplate
  • 12-foot long 12 gauge super flexible grounded power cord with110V-12P plug
Gear Motor Base
Feeler Gauge
Food Grade Mineral Oil
Product Reviews
Rate this product:  1   2   3   4   5 

May we also suggest...
Check the check boxes next to the additional products that you would like to add to the shopping cart, then click on the "Add to Cart" button above. A check box is not shown if a product requires that you select an option or fill out a field. () indicates a required accessory.

Monster Brewing Hardware
240 Compton Drive
Fayetteville, GA 30215
678-350-1731
info@MonsterBrewingHardware.com